Numark 5000FX Mixer

Numark 5000FX Professional 5-Channel Scratch Mixer With Effects and Sampler

The Numark 5000FX is a 5-channel tabletop DJ mixer with integrated sampling, scratching, and effects. There are 3 phono, 9 line (3 switchable to phono), and 2 mic inputs — including a top-mounted Neutrik jack. Outputs include XLR balanced and RCA unbalanced master, zone, booth, record, and S/PDIF digital. Additional features include dual BPM meters, fader start, and a replaceable crossfader with adjustable slope.

Technical Info:

• 12"" tabletop configuration
• 5 input channels with 3 phono, 9 line (3 switchable to phono), and 2 mics
• Master balanced, unbalanced, XLR, 2 zone and 1 S/PDIF outputs
• Dual Beatkeeperâ„¢ units to auto–detect BPM from 2 sources
• BPM alignment of effects and loops
• Effects processor with interactive scratch/effect/pitch wheel
• Effects include: Scratch, Sonar, Chop, Echo, Delay, Filter with Vocal kill
• Pitch/Key shift, Distort with Vocoder
• 18 Second audio buffering for Scratching and Reverse Audio with Bleep effect
• Onboard sampler with 30 seconds of memory, smart looping, and BPM synchronization
• Optional rack ears available
• Line: 10Kohm input impedance; 83mV rms sensitivity for 1.22V output
• Mic: 600 ohm input impedance unbalanced; 1.9mv rms sensitivity for 1.22V output; 200mV rms max input
• Phono: 47Kohm input impedance; 1.3mV rms sensitivity @1KHz for 1.22V output
• Line: 6.5V rms max
• Headphone: 0.5W into 47 ohm
• Distortion: less than 0.01%
• Line: Better than 82dB
• Mic: Better than 80dB
• Phono: Better than 72dB
• Line: 20Hz-20KHz ±0.5dB
• Mic: 20Hz-15KHz ±0.5dB
• Phono: ±1dB except for controlled attenuation of –3dB @ 20Hz to reduce rumble and feedback
• Bass: +6/-32dB @40Hz
• Middle: +6/-32dB @1.35KHz
• Treble: +6/-32dB @15KH
• Channel Kill: 80dB at 20Hz-20KHz
• Power Consumption: 24 Watts typical; 29 Watts with full headphone output
• Dimensions (W x D x H): 320mm x 355mm x 100mm
• Weight: 6.1 kgs
• The maximum sample length is 36 seconds, total available buffer is 48 seconds, and buffer not used for sampler is used for echo, delay, scratch, reverse, and bleep effects. The sampler will automatically stop recording once the record time exceeds 36 seconds.